PTS Mould Fabrication Co.Ltd
About us
PTS Mould Fabrication Co., Ltd is an ISO 9001:2015 registered Company, founded in 2006, Located in "Mold Town" ChangAn Town of Dongguan, China, which only takes 35minutes from Shenzhen BaoAn airport by driving. we are in an ideal location to service customers fly in Shenzhen. We have been providing quality tooling, complete plastic injection molds, die cast dies to industry for over 13 years, we specialize in plastic injection molds and die casting dies for a variety of industries. Our focus is to provide maximum tool life with zero defects assuring your investment will save you time and money.
read more
What We Do
What We Do
Injection-Molding Injection-Molding

Injection-Molding

Our company has the world's leading precision mold equipment, committed to mold opening custom, all kinds of plastic products, injection molding service manufacturers.
view more
Auto Parts Auto Parts

Auto Parts

In a word, theoptimization of auto parts and components circulation system is relative to all aspects.
view more
Precision Plastic Parts Precision Plastic Parts

Precision Plastic Parts

Our factory is good at making any kind of plastic mould, electron plastic fitting mould, carplastic fitting mould and precise mould and so on.
view more
Engineering Engineering

Engineering

The company has a perfect quality and production management system, and suggests its own mold design and processing standards. At present, it has an excellent team of more than 80 people, more than 20 project and design engineers to serve customers, and more than 70% of the molds are exported to foreign countries.Since its establishment, the company has continuously surpassed itself and served the society.
view more
13
years of providing quality tooling, complete plastic injection molds, die cast dies to industry
800
our annual capacity is of 800 sets of mold
5000
exported over 5000 top quality molds
35
view more
products categories
featured products
High brake lamp mold

High Position Brake Lamp Mold for Automotive Plastic Accessories

Mold Material:Steel Product Material:ABS,PP,PET,PC,PA,PMMA etc. PTS mold It is mainly involved in the production and processing of plastic molds and injection products such as automobile lamps, automobile accessories, communication equipment, household appliances and daily necessities.

High Position Brake Lamp Mold for Automotive Plastic Accessories

Mold Material:Steel Product Material:ABS,PP,PET,PC,PA,PMMA etc. PTS mold It is mainly involved in the production and processing of plastic molds and injection products such as automobile lamps, automobile accessories, communication equipment, household appliances and daily necessities.
view more
Plastic Nuts Injection Moulding

Plastic Injection Moulding for Nuts

Free sample:Available Certificate:ISO9001:2015 Package:Wooden box,Bags,Pallet,Container ,ect Feature:Eco-Friendly,Light Weight Shape:Sheet ,plate,Rod,Bar,Tube,Part Processing:CNC Machine or Injection molding

Plastic Injection Moulding for Nuts

Free sample:Available Certificate:ISO9001:2015 Package:Wooden box,Bags,Pallet,Container ,ect Feature:Eco-Friendly,Light Weight Shape:Sheet ,plate,Rod,Bar,Tube,Part Processing:CNC Machine or Injection molding
view more
Automobile Control Switch Mould

Automobile Control Switch Mould

Business scope: development, production, processing, precision mold design and manufacturing, precision injection parts, mechanical equipment and accessories, plastic products, electronic products, medical equipment, automation equipment, process gifts, auto parts.

Automobile Control Switch Mould

Business scope: development, production, processing, precision mold design and manufacturing, precision injection parts, mechanical equipment and accessories, plastic products, electronic products, medical equipment, automation equipment, process gifts, auto parts.
view more
Mold of Automotive Control

Mold of Automotive Control

Lead Time:  Quantity(Sets)1-1 >1 Est.Time(days)30 Negotiable Application: Car Material:Stainless Steel Packaging details:Moulds are pached in wooden cases plasitc products are packed in cartons We have our own team that can design and produce various products to meet your needs. We have professional technical support. Good quality, competitive price and quick response. Strict quality control process.

Mold of Automotive Control

Lead Time:  Quantity(Sets)1-1 >1 Est.Time(days)30 Negotiable Application: Car Material:Stainless Steel Packaging details:Moulds are pached in wooden cases plasitc products are packed in cartons We have our own team that can design and produce various products to meet your needs. We have professional technical support. Good quality, competitive price and quick response. Strict quality control process.
view more
Mold of Automobile Plastic Parts

Mold of Automobile Plastic Parts

If you have 3D design, or 2D detailed drawings for the plastic components, then it is available for getting the quotation, if you only have the plastic samples, then please do the dimension indication on the picture and send us the clear picture for getting a more correct quotation.

Mold of Automobile Plastic Parts

If you have 3D design, or 2D detailed drawings for the plastic components, then it is available for getting the quotation, if you only have the plastic samples, then please do the dimension indication on the picture and send us the clear picture for getting a more correct quotation.
view more
Injection Molding Production Assembly

Injection Molding Production Assembly

One-stop production service, the factory is around you. Our factory undertakes mold, international quality system standardized production, mold, injection molding production, assembly one-stop service.Strict quality control system, from product design to raw material procurement, production process, finished product testing are in accordance with international high standards.

Injection Molding Production Assembly

One-stop production service, the factory is around you. Our factory undertakes mold, international quality system standardized production, mold, injection molding production, assembly one-stop service.Strict quality control system, from product design to raw material procurement, production process, finished product testing are in accordance with international high standards.
view more
Plastic Printer Parts Injection Mold Making

Plastic Injection Mold for Printer Parts

This type of high precision and high demand plastic printer shell, our company engineers about 3 months design time, dozens of modification of 3d drawings, many seminars to complete this mold, thus mass production. Now, the factory equipment further upgrades, the worker increases unceasingly, the plastic injection molding/the mold presses, the ramming mold, the rapid molding, the hot/the cold runner mold, the injection molding.

Plastic Injection Mold for Printer Parts

This type of high precision and high demand plastic printer shell, our company engineers about 3 months design time, dozens of modification of 3d drawings, many seminars to complete this mold, thus mass production. Now, the factory equipment further upgrades, the worker increases unceasingly, the plastic injection molding/the mold presses, the ramming mold, the rapid molding, the hot/the cold runner mold, the injection molding.
view more
Plastic Parts for Printer

Plastic Parts for Printer

Surface Treatment:EDM,Polish,Texture Processing Trade Form:OEM & ODM Mold Base:LKM,DME,HASCO Mold Analysis:Supply Mold analysis in detail(Pins,Gate,PI,Slider,etc)

Plastic Parts for Printer

Surface Treatment:EDM,Polish,Texture Processing Trade Form:OEM & ODM Mold Base:LKM,DME,HASCO Mold Analysis:Supply Mold analysis in detail(Pins,Gate,PI,Slider,etc)
view more
Automotive plastic lens

Automotive Lamp Lens Car Light Moulding

We manufacture auto headlights, rear view lights, brake lights, auto light fittings, LED Plastic lenses,Automotive lenses .These are customer samples, with the consent of the customer open(The mold is not open). if you need to customize, please let us know. Thank you very much.

Automotive Lamp Lens Car Light Moulding

We manufacture auto headlights, rear view lights, brake lights, auto light fittings, LED Plastic lenses,Automotive lenses .These are customer samples, with the consent of the customer open(The mold is not open). if you need to customize, please let us know. Thank you very much.
view more
Plastic Injection Molds for Automotive Connectors & Connector Seals

Plastic Injection Molds for Automotive Connectors & Connector Seals

13 years experience in mold manufacturing. To provide customers with reliable quality mold. High precision, high efficiency production, fast delivery. Mold is customized according to your ideas, only for you. From design to mold one-stop service, mold samples will be submitted for your approval.

Plastic Injection Molds for Automotive Connectors & Connector Seals

13 years experience in mold manufacturing. To provide customers with reliable quality mold. High precision, high efficiency production, fast delivery. Mold is customized according to your ideas, only for you. From design to mold one-stop service, mold samples will be submitted for your approval.
view more
injection molding

Injection Plastic Mold Manufacturer

plastic injection molds and mould manufacturer 1-Start from part design analysis 2-Mold design drawing and DFM report available so you can see how is the mold going to be before mold making 3-If product is complex,moldflow report will be present as well 4-In house mold making shop ensure you mold quality under well control. 5-Normally it takes 20-40 days to make mold,precise time depends on part design

Injection Plastic Mold Manufacturer

plastic injection molds and mould manufacturer 1-Start from part design analysis 2-Mold design drawing and DFM report available so you can see how is the mold going to be before mold making 3-If product is complex,moldflow report will be present as well 4-In house mold making shop ensure you mold quality under well control. 5-Normally it takes 20-40 days to make mold,precise time depends on part design
view more
Car Stick ABS Armrest Glove Stall Paddle Cup Switch Knob Frame

Injection Mold of Car Center Console

This kind of product is the finished product of injection mold of Toyota motor, mainly the plastic storage box and storage box of automobile, which is a large mold. The customer needs to customize 3D drawings, and now the mold has been exported.Upload samples with customer approval.Thank every employee for their hard work and thank customers.

Injection Mold of Car Center Console

This kind of product is the finished product of injection mold of Toyota motor, mainly the plastic storage box and storage box of automobile, which is a large mold. The customer needs to customize 3D drawings, and now the mold has been exported.Upload samples with customer approval.Thank every employee for their hard work and thank customers.
view more
Plastic Electric Power Tool Drill Mould

Plastic Electric Power Tool Drill Mould

Shaping Mode:Plastic Injection Mould Product Material:Plastic Product:Drill mould Color:As your request Product Type:Plastic Shell Mould Cavity:1-2 Product Name:Professional 100% virgin molded plastic products mould Surface treatment:Mirror PolishPlastic material:ABS/PP/PS/PE/PVC/PA6/PA66 Runner:Hot Runner/Cold Runner This product is a two-color mold, hand-held power tools, plastic shell precision design, home and industrial electrical tools, exported to the americas, I take charge of plastic parts, separate design and mold manufacturing.This power tool is already on the market.

Plastic Electric Power Tool Drill Mould

Shaping Mode:Plastic Injection Mould Product Material:Plastic Product:Drill mould Color:As your request Product Type:Plastic Shell Mould Cavity:1-2 Product Name:Professional 100% virgin molded plastic products mould Surface treatment:Mirror PolishPlastic material:ABS/PP/PS/PE/PVC/PA6/PA66 Runner:Hot Runner/Cold Runner This product is a two-color mold, hand-held power tools, plastic shell precision design, home and industrial electrical tools, exported to the americas, I take charge of plastic parts, separate design and mold manufacturing.This power tool is already on the market.
view more
Plastic Injection Mold Automobile Skylights

Plastic Injection Mold Automobile Skylights

This product is the skylight of Mazda automobile. The mould is manufactured, designed and tested by our company.The mold has been moved out of the country.Our company is experienced in automobile mould. Plastic moulding Precision:0.0001mm Competitive price. Continuance service and support. ISO standard Application expertise. Quality,reliability and long product life.

Plastic Injection Mold Automobile Skylights

This product is the skylight of Mazda automobile. The mould is manufactured, designed and tested by our company.The mold has been moved out of the country.Our company is experienced in automobile mould. Plastic moulding Precision:0.0001mm Competitive price. Continuance service and support. ISO standard Application expertise. Quality,reliability and long product life.
view more
Mold Bace Injection

Plastic Injection Mold Bases Manufacturing

Packaging Details:Export standard wooden box packing Cavity:Single Runner:Hot runner,Cold Runner (YUDO,HUSKY,MOLD-MASTER,MOULD-TIP,DME) Mold Material:Plastic Shaping Mode:Plastic Injection Mold Mould Gate:Side,Pin-point,Sub,Edge,Banana gate Precision:0.0001mm Competitive price Application expertise Quality,Reliability and long product life

Plastic Injection Mold Bases Manufacturing

Packaging Details:Export standard wooden box packing Cavity:Single Runner:Hot runner,Cold Runner (YUDO,HUSKY,MOLD-MASTER,MOULD-TIP,DME) Mold Material:Plastic Shaping Mode:Plastic Injection Mold Mould Gate:Side,Pin-point,Sub,Edge,Banana gate Precision:0.0001mm Competitive price Application expertise Quality,Reliability and long product life
view more
LED Lamp  Plastic Lens

LED Lamp Plastic Lens

Place of Origin:Guangdong, China (Mainland) Model Number:car lens prototype Shaping Mode:Plastic Injection Mould Product Material:Plastic Product:Vehicle Mould Product name:Plastic car lens auto parts low injection mold dash board Surface Ttreatment:painting, silk screen, polish, anodizing, chrome plating Injection mold industry, with experienced staff and technology. We can help you with the original design, so that you can mass-produce the product you want from the initial stage of the prototype

LED Lamp Plastic Lens

Place of Origin:Guangdong, China (Mainland) Model Number:car lens prototype Shaping Mode:Plastic Injection Mould Product Material:Plastic Product:Vehicle Mould Product name:Plastic car lens auto parts low injection mold dash board Surface Ttreatment:painting, silk screen, polish, anodizing, chrome plating Injection mold industry, with experienced staff and technology. We can help you with the original design, so that you can mass-produce the product you want from the initial stage of the prototype
view more
Now Start customizing your high quality molds
This is one-stop supplier of customized plastic mold and Zinc and Aluminum die casting mold in China.Our factory are good at Automotive parts,Precision parts,Electronic products and 2 K (double color)mould injectin. You should provide 3 D part drawings to us to make the quotation to you. Thank you so much.
get in touch
Design Tips
  • Basic knowledge of mold design, old workers do not know Basic knowledge of mold design, old workers do not know
    01 Common plastic engineering materials and shrinkage? ABS:0.5%(super glue free) PC :0.5% (bulletproof glass glue) PMMa:0.5% : (plexiglass) PE: 2% polyethylene PS:0.5%(polyphenylethylene) Pp :2%(100% flexible adhesive) PA: 2% (nylon) PVC: 2% (polyvinyl chloride) POM: 2% (steel) ABS + PC: 0.4% PC + ABS: 0.5% Engineering materials: ABS PC PE POM PMMA PP PPO PS PET 02 What are the major systems of the mold? Casting → ejecting → cooling → molding → exhaust 03 What problems should be paid attention to in the process of mold design? (1) the wall thickness should be uniform as far as possible, and the stripping slope should be large enough. (2) the transition part shall be gradual, smooth and avoid sharp corners. (3) gate.The runner should be as wide and short as possible, and the gate position should be set according to the contraction and condensation process. (4) the surface of the mold should be clean and smooth with low roughness (0.8 is the best). (5) vent holes and slots must be adequate to expel air and gases from the melt. (6) except PET, the wall thickness should not be too thin, generally not less than 1mm. 04 Lump of plastic often occurs? Lack of glue → mantle → bubble → shrinkage → weld mark → black dot → striation → warping → layering → peeling 05 Common plastic mold steel? 45# S50c 718 738 718H 738H P20 2316 8407 H13 NAK80 NAK55 S136 S136H SKD61 06 What kind of material is used for high mirror finish? Commonly used high hard heat treatment steel, such as: SKD61, 8407, S136 07 What are the structures of the formwork? Panel →A plate →B plate → square iron → guide post → thimble plate → thimble fixing plate → bottom plate 08 What are the basic forms of the parting surface? Flatness → inclination → curved surface → perpendicular → cambered surface 09 How do you hide each other in UG? CtrL + B or ctrL + shift + B 10 What are the mould processing machinery and equipment? Computer gong lathe milling machine grinder drilling machine. 11 What is 2D and what is 3D? D Dimension, 2D refers to the two-dimensional plane, 3D refers to the three-dimensional space, in the mold section, 2D usually refers to the plane drawing (CAD drawing), and 3D usually refers to the three-dimensional drawing. 12 What is the default accuracy of pro/e?What is the UG default accuracy? The default accuracy of pro/e is 0.0012MM and UG is 0.0254MM. 13 Global mold frame production four strong enterprises? Germany: HASCO Japan: FUTABA us: DME China: LKM (dragon) 14 What is the default word height for CAD? The default CAD word height is 2.5mm. 15 What is impingement? What is impingement? The mating surface of male and female dies parallel to the PL surface is called the penetrating surface, and the mating surface uneven to the PL surface is called the inserting surface. 16 The relationship between strips and silk Both strips and silk are length units, and the strips are used in Taiwan language, 1 strand =0.01MM, while the silk is used in Hong Kong language, 1 strand =0.01MM, so 1...
  • What the car grille does (see pictures) What the car grille does (see pictures)
    What the car grille does (see pictures) 1 protection Many people believe that the role of the grille is to protect the water tank, to protect the engine cabin components from external impact.This is not the primary role.Cars are designed to take hydrodynamics into account, and most flying insects and gravel bounce off the road.The grille prevents larger stones from entering the engine compartment and damaging the components. 2 Decoration You don't want to believe that the most central function of the intake grille at this point in time is to decorate, to hide the mechanical structure of the engine compartment.Imagine all the pipes and brackets in the engine compartment without the intake grille. 3 Brand style Many brands are creating their own family DNA, and the air intake grille is one of the more important elements in the design.Volkswagen, audi and BMW are good examples. 4 Ventilation The engine needs air, and the intake grille is designed to allow enough air to enter the engine compartment.If it is winter and too much cold air is sucked into the engine, it is difficult for the engine to reach the operating temperature.Some cars don't have completely hollow grilles.
  • Automobile taillight design case appreciation Automobile taillight design case appreciation
    The driving on the road is most concerned about the tail of the car, among which the taillight is the most interesting part. In addition to the sense of technology, horizontal, intelligent and other general terms used to describe the trend of the headlights, through a lot of our analysis and research, the following five trends of the taillight are summarized: 1. OLED will become the mainstream in mass production in the future; The rise of oleds has made it possible for designers to create imaginative graphics solutions. 2: symbol lamp will become an important brand DNA; The major engine manufacturers in the taillight graphics on the article, these symbolic graphics in addition to intelligent demand is to improve the degree of brand identification. 3: taillights become an important position of parametric design; The application of parameterization is no longer a new design method, and the headlamp is the most interesting part. This figure is common in mass production vehicles, and without exception, it is an effective way to enhance the sense of technology. 4: the light belt through taillight has become the design standard; The use of light strips, such as the unified specifications of major engine manufacturers, has formed a very representative design trend. In addition to enhancing the sense of technology, the horizontal slender taillight is also a sharp tool for automobile design to "show the width". 5: naked leakage taillights to enhance the three-dimensional sense of the tail and sense of technology; Starting with porsche's bare and leaky headlights, a distinctive modern trend has emerged, with layers of design and a glimpse of the inner workings.
  • You know what?Injection mold acceptance these steps KO before the mold You know what?Injection mold acceptance these steps KO before the mold
    You know what?Injection mold acceptance these steps KO before the mold I. appearance, size and coordination of molding products Ii. Mold appearance Mold material and hardness Iv. Ejection, reset, core pulling and core pulling V. cooling and heating system Pouring system Hot runner system Viii. Forming part, parting surface and exhaust groove Ix. Injection molding production process X. packaging and transportation
  • Car classic front and rear headlights design appreciation Car classic front and rear headlights design appreciation
    Car LED lights before and after the headlights to enjoy a large number of pictures, please click.
  • How are commonly used bits for machining produced? How are commonly used bits for machining produced?
    How are commonly used bits for machining produced? In machining, we often use a drill bit, but do you know how the drill bit is produced? In the development of global tool grinder, makino has always been the leading role.Makino machine successfully developed the world's first 10-axis CNC tool grinder in 1982, and thus opened a new situation in the development history of tool grinder.After more than half a century of technical heritage, has been working for the development of the latest tool grinder technology at home and abroad. According to the development requirements of the Chinese market, makino seiji in 2018 research and development and launched a new tool grinding machine SG10 suitable for small diameter processing, as one of the excellent products of makino seiji, in November 2018 in Tokyo JIMTOF Japan for the first time, and has been praised by customers at home and abroad. SG10 is the smallest model in makino automatic processing machine.At the same time with standard automatic loading and unloading device and grinding wheel automatic replacement device, than the same machine tool AGE30 saving 30% floor area. Excellent machining performance high precision, high stability and high efficiency is the standard.SG10 has excellent stability in the continuous machining of high-precision mould tools, and also performs well in the accuracy of spherical knife arc, which can reach 2um.
Basic knowledge of mold design, old workers do not know Basic knowledge of mold design, old workers do not know
01 Common plastic engineering materials and shrinkage? ABS:0.5%(super glue free) PC :0.5% (bulletproof glass glue) PMMa:0.5% : (plexiglass) PE: 2% polyethylene PS:0.5%(polyphenylethylene) Pp :2%(100% flexible adhesive) PA: 2% (nylon) PVC: 2% (polyvinyl chloride) POM: 2% (steel) ABS + PC: 0.4% PC + ABS: 0.5% Engineering materials: ABS PC PE POM PMMA PP PPO PS PET 02 What are the major systems of the mold? Casting → ejecting → cooling → molding → exhaust 03 What problems should be paid attention to in the process of mold design? (1) the wall thickness should be uniform as far as possible, and the stripping slope should be large enough. (2) the transition part shall be gradual, smooth and avoid sharp corners. (3) gate.The runner should be as wide and short as possible, and the gate position should be set according to the contraction and condensation process. (4) the surface of the mold should be clean and smooth with low roughness (0.8 is the best). (5) vent holes and slots must be adequate to expel air and gases from the melt. (6) except PET, the wall thickness should not be too thin, generally not less than 1mm. 04 Lump of plastic often occurs? Lack of glue → mantle → bubble → shrinkage → weld mark → black dot → striation → warping → layering → peeling 05 Common plastic mold steel? 45# S50c 718 738 718H 738H P20 2316 8407 H13 NAK80 NAK55 S136 S136H SKD61 06 What kind of material is used for high mirror finish? Commonly used high hard heat treatment steel, such as: SKD61, 8407, S136 07 What are the structures of the formwork? Panel →A plate →B plate → square iron → guide post → thimble plate → thimble fixing plate → bottom plate 08 What are the basic forms of the parting surface? Flatness → inclination → curved surface → perpendicular → cambered surface 09 How do you hide each other in UG? CtrL + B or ctrL + shift + B 10 What are the mould processing machinery and equipment? Computer gong lathe milling machine grinder drilling machine. 11 What is 2D and what is 3D? D Dimension, 2D refers to the two-dimensional plane, 3D refers to the three-dimensional space, in the mold section, 2D usually refers to the plane drawing (CAD drawing), and 3D usually refers to the three-dimensional drawing. 12 What is the default accuracy of pro/e?What is the UG default accuracy? The default accuracy of pro/e is 0.0012MM and UG is 0.0254MM. 13 Global mold frame production four strong enterprises? Germany: HASCO Japan: FUTABA us: DME China: LKM (dragon) 14 What is the default word height for CAD? The default CAD word height is 2.5mm. 15 What is impingement? What is impingement? The mating surface of male and female dies parallel to the PL surface is called the penetrating surface, and the mating surface uneven to the PL surface is called the inserting surface. 16 The relationship between strips and silk Both strips and silk are length units, and the strips are used in Taiwan language, 1 strand =0.01MM, while the silk is used in Hong Kong language, 1 strand =0.01MM, so 1...
What the car grille does (see pictures) What the car grille does (see pictures)
What the car grille does (see pictures) 1 protection Many people believe that the role of the grille is to protect the water tank, to protect the engine cabin components from external impact.This is not the primary role.Cars are designed to take hydrodynamics into account, and most flying insects and gravel bounce off the road.The grille prevents larger stones from entering the engine compartment and damaging the components. 2 Decoration You don't want to believe that the most central function of the intake grille at this point in time is to decorate, to hide the mechanical structure of the engine compartment.Imagine all the pipes and brackets in the engine compartment without the intake grille. 3 Brand style Many brands are creating their own family DNA, and the air intake grille is one of the more important elements in the design.Volkswagen, audi and BMW are good examples. 4 Ventilation The engine needs air, and the intake grille is designed to allow enough air to enter the engine compartment.If it is winter and too much cold air is sucked into the engine, it is difficult for the engine to reach the operating temperature.Some cars don't have completely hollow grilles.
Automobile taillight design case appreciation Automobile taillight design case appreciation
The driving on the road is most concerned about the tail of the car, among which the taillight is the most interesting part. In addition to the sense of technology, horizontal, intelligent and other general terms used to describe the trend of the headlights, through a lot of our analysis and research, the following five trends of the taillight are summarized: 1. OLED will become the mainstream in mass production in the future; The rise of oleds has made it possible for designers to create imaginative graphics solutions. 2: symbol lamp will become an important brand DNA; The major engine manufacturers in the taillight graphics on the article, these symbolic graphics in addition to intelligent demand is to improve the degree of brand identification. 3: taillights become an important position of parametric design; The application of parameterization is no longer a new design method, and the headlamp is the most interesting part. This figure is common in mass production vehicles, and without exception, it is an effective way to enhance the sense of technology. 4: the light belt through taillight has become the design standard; The use of light strips, such as the unified specifications of major engine manufacturers, has formed a very representative design trend. In addition to enhancing the sense of technology, the horizontal slender taillight is also a sharp tool for automobile design to "show the width". 5: naked leakage taillights to enhance the three-dimensional sense of the tail and sense of technology; Starting with porsche's bare and leaky headlights, a distinctive modern trend has emerged, with layers of design and a glimpse of the inner workings.
You know what?Injection mold acceptance these steps KO before the mold You know what?Injection mold acceptance these steps KO before the mold
You know what?Injection mold acceptance these steps KO before the mold I. appearance, size and coordination of molding products Ii. Mold appearance Mold material and hardness Iv. Ejection, reset, core pulling and core pulling V. cooling and heating system Pouring system Hot runner system Viii. Forming part, parting surface and exhaust groove Ix. Injection molding production process X. packaging and transportation
Car classic front and rear headlights design appreciation Car classic front and rear headlights design appreciation
Car LED lights before and after the headlights to enjoy a large number of pictures, please click.
How are commonly used bits for machining produced? How are commonly used bits for machining produced?
How are commonly used bits for machining produced? In machining, we often use a drill bit, but do you know how the drill bit is produced? In the development of global tool grinder, makino has always been the leading role.Makino machine successfully developed the world's first 10-axis CNC tool grinder in 1982, and thus opened a new situation in the development history of tool grinder.After more than half a century of technical heritage, has been working for the development of the latest tool grinder technology at home and abroad. According to the development requirements of the Chinese market, makino seiji in 2018 research and development and launched a new tool grinding machine SG10 suitable for small diameter processing, as one of the excellent products of makino seiji, in November 2018 in Tokyo JIMTOF Japan for the first time, and has been praised by customers at home and abroad. SG10 is the smallest model in makino automatic processing machine.At the same time with standard automatic loading and unloading device and grinding wheel automatic replacement device, than the same machine tool AGE30 saving 30% floor area. Excellent machining performance high precision, high stability and high efficiency is the standard.SG10 has excellent stability in the continuous machining of high-precision mould tools, and also performs well in the accuracy of spherical knife arc, which can reach 2um.
latest news
more news
Typical Projects
Automobile rearview mirror assembly/material/appearance requirements are fully resolved
Automobile rearview mirror assembly/material/appearance requirements are fully resolved
As we know, the rearview mirror is divided into outer rearview mirror and inner rearview mirror. A typical external rear-view mirror is composed of nearly 20 parts, among which plastic materials are mainly used in the rear-view mirror case, mirror case base, bracket and triangle plate. These pieces play a different function or appearance, the performance requirements of the material are different, and then we give a detailed description of its material selection. 01 Rearview mirror housing Rear-view mirror shell is generally designed to be the same color of the body, and most of them are high-gloss effect, so most of them are sprayed, and a few electroplating schemes can also be adopted to reduce the pressure of environmental protection. Common scheme of rearview mirror housing Characteristics of post-processing and material selection program post processing material characteristic spray lacquer spray lacquer heat-resistingABS PC ABS The colors are varied; Good weather and scratch resistance electroplate heat-resistingABS Part or all electroplating, high cost, multi - high-end car use Avoid spraying nothing heat-resistingABS Good weather resistance Highlight black effect Black brightness effect, black or white can be achieved Rearview mirror - white upper housing, PMMA/ASA M1600 Rear view mirror - black lower housing, PMMA/ASA M1800 02 Mirror shell base The mirror housing base plays an assembly and transition role, so ASA or PP+MD is preferred. Common scheme of mirror housing base Characteristics of post-processing and material selection program material characteristic post processing Heat ASA Specular ASA PMMA/ASA Good weather resistance Highlight black effect Black bright effect, good weather resistance nothing PP+MD low coat Specular black mirror housing base, PMMA/ASA M1800 03 Rearview mirror holder The rear-view mirror bracket mainly plays a supporting role, requiring high rigidity, good appearance, good weather resistance, can choose metal parts, plastic parts or metal and plastic combination, most choose aluminum alloy, PA+GF or PBT+GF. Common scheme of rearview mirror bracket Characteristics of post-processing and material selection postprocessing material characteristic nothing Aluminum alloy +ASA, etc High rigidity, high toughness, high density, high cost nothing PA+GF hive consideration to toughness, poor dimensional stability, aging resistance nothing PBT+GF High rigidity, good dimensional stability, good surface, low cost Rearview mirror bracket, PBT+30%GF PBT 3730G The triangle plate of the rear-view mirror is the part connected with the car window, which is mostly formed with the rear-view mirror bracket. If it is formed separately, the selected materials are metal, ASA or PC/ASA. Above are the material selection and characteristics of the external rearview mirror.
read more
Audi is the light factory, Honda is the engine factory, the car companies are best at what?
Audi is the light factory, Honda is the engine factory, the car companies are best at what?
Audi focuses on car lights There are two kinds of lights in the world, one is the audi lamp, the other is the lamp, as early as the xenon headlight era, the first generation of audi A8 began to lead the trend of car lights.Audi's headlights have always been full of tricks. If I told you now that audi is turning to the home lighting market, would you pay for such cool lights? Honda focuses on the engine Buy start send a car, Honda relies on this "unique skill" win the trust of a lot of consumer, till now, Honda rolls out many turbocharged engine, in be in the same level in, talk about fuel consumption and power Honda is more outstanding. Nissan focuses on sofas Nissan car seat comfort is very famous, has the "moving sofa" title.The first teana is synonymous with comfort for the nissan line, especially the "zero gravity" seats, which provide the most comfortable support for the human waist, allowing the driver to relax and feel comfortable. VW is focused on studying the Chinese Now many Volkswagen cars are tailor-made for Chinese consumers. Volkswagen, which knows Chinese consumers' preferences, is going further and further down the road of "opportunistic". BMW focuses on handling There is a saying called "driving BMW sitting Mercedes", BMW control is in many luxury cars in the sharp weapon of breaking out, driving will have the feeling of "people and cars together" Wuling focuses on drawing goods Wuling macro light is a god car in China, "endurance" makes its sales very considerable, both can carry goods and pull people, but also has a luxury car killer, drift artifact, and the title of the monster carrying customers. Zotye focuses on other cars Zotye's "high imitation" ability is indeed second to none in China, most of its models are copying other brands, and it has dominated the headlines and hot spots with various imitation shows for a long time, causing the media and Internet users to heckle "bursts of cheers".
read more
Silk-Screen,Oil Paint Testing Standard
Silk-Screen,Oil Paint Testing Standard
Adhesion (non-destructive) Silk-Screen Use 3M adhesive paper (or customer specified) to stick it flat on the surface of the test product with a length of 50mm;Angle 45 degrees: instantly pull up the tape 3M Tape、Knife The surface of the experimental materials is free from printing ink, electroplating layer, bronzing, paint layer falling off, peeling off, and so on Electroplating and bronzing Use 3M adhesive paper (or customer specified) to stick it flat on the surface of the test product with a length of 50mm;Angle 45 degrees: instantly pull up the tape 3M Tape、Knife Oil Paint Use 3M adhesive paper (or customer specified) to stick it flat on the surface of the test product with a length of 50mm;Angle 45 degrees: instantly pull up the tape 3M Tape、Knife Wear-resistant test Alcohol concentration 99.7% 500g weight,test 25 times Weight,concentration 95% alcohol Testing materials do not see the substrate, paint surface is not white Hardness Test 1. The test products placed in a horizontal platform, with a hardness of HB pencil and 45° Angle on the surface of the rubber, the pencil lead broken shall prevail, ahead of the test material for the experimenter scratching 10 mm (5) 2. Simple method: scratch the test material surface with a force of 500G nail Hardness tester, HB pencil, drawing eraser Wipe clean with drawing eraser, test material surface without scratches is OK Destructive Toughness Use pliers to break the test product with a force of 500G, and break or bend the test product Pliers )Plastic body (broken section should be gray white, no fragmentation phenomenon;If the section is smooth, black and brittle, then NG) Cut-Gross test adhesion (destructive) Electroplate Interval of every 1 mm ~ 1.2 mm, with a total of 10, has become a 10 * 10 100 squares, the knife row down time should be cut to meet substrate, not only to cut on the coating, 3 m tape in the best position, press with finger will closely attached with adhesive tape, Angle to 45 degrees of the strength of the instantaneous tear tape, visual materials on the coatings have fall off phenomenon, in addition, the adhesive tape is not literally a can (blade width is about 10mm~12mm) Use a 10-fold magnifying glass to observe the peeling degree 4B (small pieces of paint come off at the intersection of the lines, and the total peeling area is less than 7%). Oil Paint Gilding Temperature Test High Temperature High temperature 105 ℃ testing 4 hours (unless it is otherwise special requirements of customers) after the test there shall be no material, paint blowout, blister, plastic deformation High-low oven After the test can not have the material, paint burst, foam, plastic deformation Low Temperature 40 ℃ low temperature test - test 3 hours (unless it is otherwise special requirements of customers) after the test there shall be no material, paint blowout, blister, plastic deformation
read more
newsletter
subscribe to receive inspiration, ideas and news in your inbox.
  • f
  • t
  • y
  • b
  • in
  • p
welcome to ptsmould
If you have any problem when using the website or our products, please write down your comments or suggestions, we will answer your questions as soon as possible!Thank you for your attention!

Home

Products

About us

Contact Us