Mar 25, 2019
1, line The command line Quick command L Operation mode: input L space screen point the first point point the second point point the third point space finished, of course you can also endless draw. 2, copy,The command copy Quick command CO (some CAD is C) Operation mode:Input CO - Spaces to choose object, space - choosing datum mark to choose where to copy, the blank space end (cad 2004 to continuous replication, according to an M before choosing datum. Then choose reference point, can continuous replication, cad 2004 version directly after can be continuous replication) if you want to copy the object distance is 1000 mm, this "he CO - operation Spaces to choose object, space to select reference point, input relative coordinates to space (if it is horizontal or vertical direction, then press F8 opened the orthogonal, by moving the mouse to a direction,And then I'm going to say 1000 and then I'm going to say space) 3, mobile Command to MOVEQuick command M Operation mode: same as copy 4, round Command CIRCLE Fast command C(different versions have different CIR CR) Operation mode input C space point input diameter space or pull the mouse, click the left key to determine 5, offset Command OFFSET Quick command O Operation mode: input O space input offset distance space (or specify the distance on the screen in the way of two points) to choose the object to be offset in the direction to offset the point of the mouse 6. Format brush Command MATCHPROP Quick command MA Operation mode input MA space select reference object select object to brush 7. View properties Command the PROPERTIES Quick command MO Operation mode input mo to select the object (you can see the properties of the object, coating color, geometric size, etc.) 8, arrayCommand: array Quick command AR If you want to generate a graph with 3 rows and 4 columns, write 3 rows and 4 columns followed by "offset distance and direction" as you want 9Command: the EXTEND Express command EX Operation mode input EX space select want to extend there, the space select the line to be extended Tip: a line or object in front of a line that may intersect Tips: input EX space space point is extended object can be directly extended to the nearest object, continue to point the line, can continue to extend to the next object. 10, shear Command: TRIM Quick command TR Operation mode: same as the extension of the same tips 11, delete Command: ERASE Quick command E Operation mode: input E space to select object space (or select object by E space) 12, go back on our word Command: U Operation mode: input U space, as long as the CAD is not closed, you can always go back to the state when open...
view more